-
Cuchillos de estilo japonés
-
Cuchillos Deba -
Cuchillos sashimi Yanagiba -
Cuchillos Usuba -
Cuchillos Sakimaru Takobiki -
Cuchillos Kiritsuke Yanagiba -
Cuchillos Wa-Santoku -
Cuchillos Kiritsuke -
Cuchillos Mioroshi -
Cuchillos Aideba -
Cuchillos Funayuki -
Cuchillos Fugubiki -
Cuchillos Sashimi Takobiki -
Cuchillos Aji-Kiri -
Cuchillos Baran-Kiri -
Cuchillos Hamo Honekiri -
Cuchillos Fugu Deba -
Cuchillos Unagi Saki -
Cuchillos Mukimono -
Cuchillos Kenmuki -
Cuchillos Sobakiri
-
- Cuchillos de estilo occidental
- Cuchillos Damasco
- Cuchillos de cocina doméstico
- Accesorios
- Regalos
- Todos los productos
Serie SUI Kiwami
- Hoja: Acero Azul #2 con Recubrimiento Negro
- Santoku: Cuchillo multiusos estilo japonés
- Mango: Mango de nogal estilo japonés con virola de cuerno de búfalo
Wa-Santoku
A Wa-Santoku is typically used in households around Japan. Unlike the standard Santoku, the Wa-Santoku has a traditional Japanese handle which shifts the balance point slightly,allowing more nimble cutting.
Blue Steel #2
Adding tungsten, chromium, and alloy carbides to White Steel makes for a tough, chip-resistant blade.
Carbon Steel
Blue Steel #2 is made by adding trace amounts of tungsten and alloy carbides (both for hardness), and chromium (for toughness and rust resistance) to White Steel, creating an alloy steel that is very tightly bonded. This also leads to better edge retention compared to White Steel #2, so you can cut better for longer. Professional chefs looking to enter the next level of quality will often choose a Blue Steel #2 knife, but beginners can use this also.
*NOTE: Carbon Steel is susceptible to rust if it is not properly cared for. Please clean and dry the blade regularly during use and after use.
Walnut Handle
Handle
This handle is made of Walnut, which is light and easy to work with. In Western Society, Walnut is commonly used for cutting boards,furniture and Gun Stocks due to its natural beauty and strength.
Forge Welded
Forging Process
A forge welded blade is essentially a blade made of more than one billet of steel. There are many variations of technique and steel combinations. At its most simple, a forge welded blade is two billets of steel heated and hammer together to form one unified piece. The steel will then be shaped by hammer into the desired blade shape. Hardened and tempered, then ground, sharpened and polished. A forge welded blade has higher strength and edge retention than a stamped blade.
Optional Engraving
Optional Engraving Service
Sakai Ichimonji provides complimentary engraving using either Japanese Kanji or English Alphabet. Please specify your preference. For details, please visit here
A knife store that has supported the history of knives and food culture in Japan.
It has been 600 years since the birth of swordmaking in the Sakai region of Japan. Sakai Ichimonji Mitsuhide's and it's craftsmen continue to build on that legacy by producing the finest blades in Japan.
This is where the culture of completing a dish of sashimi by "just cutting" and the culture of expressing sharpness as "taste" was born.
For 70 years, we have been connecting the spirit of Sakai's craftsmen with the passion of chefs in Osaka's kitchen equipment shopping district, known as the kitchen of Japan.
We are very happy that our knives can be used by people all over the world.
Precautions
After use, wash off any dirt and wipe thoroughly with a dry cloth to remove any moisture. This product is not for use with frozen foods.This product is handmade, so each piece will be different. Please use the weight and length listed as a guide. Each material is natural and may vary in color. It is not the same as the picture.We take great care with our inventory, but in the unlikely event that we are out of stock, we will contact you by email to let you know.
