Molybdenum Steel Series
Our Molybdenum Steel Series focuses on ease of care and maintenance. Made with comparatively softer stainless steel, it has shorter edge retention than other stainless knives but is significantly easier to sharpen. This series is perfect for newcomers to Japanese knives, or if you want to hone your sharpening skills.
Product number | Actual Blade Length (mm) | Full Length (mm) | Total Weight (g) |
---|---|---|---|
1s11-h180 | 170 | 310 | 100 |
1s11-h210 | 200 | 340 | 125 |
1s11-h240 | 230 | 370 | 150 |
1s11-h270 | 260 | 410 | 205 |
1s11-h300 | 290 | 445 | 215 |
Blade | Material Name | Handle |
---|---|---|
Single Edged |
AUS-8 | Magnolia Round Handle with Buffalo horn bolster |
Yanagiba (Sashimi Knife)
Yanagiba knives are mainly used for cutting Sashimi. The sharpness and edge geometry is of the utmost important with a Yanagiba, as a dull knife will damage the delicate fibres of the fish. The blade is long, slender, thin and sharp for cutting sashimi in one stroke. In addition to cutting sashimi, this knife is also used for pulling the skin. Professionals use long Yanagiba knives with blades around 300mm. For home use, Yanagiba knives with a blade of around 210mm are popular.
AUS-8
Also known as 8A, molybdenum steel and other names, AUS-8 is rust-resistant and easy to sharpen. Recommended for newcomers to the kitchen knife world.
Stainless Steel
AUS-8 Steel is a standard stainless steel that is often used in knives due to its corrosion resistance and ease of sharpening. It's lower hardness levels compared to other steels like Silver Steel #3 and VG-10 mean that it will be easier to sharpen and less likely to chip during use. Sakai Ichimonji Mitsuhide's AUS-8 knives have improved sharpness and edge retention due to our special quenching processes.
Magnolia Round Handle with Buffalo horn bolster
Handle
Our Magnolia wood handles are made from natural Magnolia and Buffalo Horn ( Ethically sourced Horn ).The Magnolia and Buffalo Horn are fitted tightly together then shaped and polished in the traditional round style to not only look beautiful, but also feel comfortable in the hand.
Forge Welded
Forging Process
A forge welded blade is essentially a blade made of more than one billet of steel. There are many variations of technique and steel combinations. At its most simple, a forge welded blade is two billets of steel heated and hammer together to form one unified piece. The steel will then be shaped by hammer into the desired blade shape. Hardened and tempered, then ground, sharpened and polished. A forge welded blade has higher strength and edge retention than a stamped blade.
Optional Engraving
Optional Engraving Service
Sakai Ichimonji provides complimentary engraving using either Japanese Kanji or English Alphabet. Please specify your preference. For details, please visit here
A knife store that has supported the history of knives and food culture in Japan.
It has been 600 years since the birth of swordmaking in the Sakai region of Japan. Sakai Ichimonji Mitsuhide's and it's craftsmen continue to build on that legacy by producing the finest blades in Japan.
This is where the culture of completing a dish of sashimi by "just cutting" and the culture of expressing sharpness as "taste" was born.
For 70 years, we have been connecting the spirit of Sakai's craftsmen with the passion of chefs in Osaka's kitchen equipment shopping district, known as the kitchen of Japan.
We are very happy that our knives can be used by people all over the world.
Precautions
After use, wash off any dirt and wipe thoroughly with a dry cloth to remove any moisture. This product is not for use with frozen foods.This product is handmade, so each piece will be different. Please use the weight and length listed as a guide. Each material is natural and may vary in color. It is not the same as the picture.We take great care with our inventory, but in the unlikely event that we are out of stock, we will contact you by email to let you know.