-
Japanese Knives
-
Deba Knives -
Yanagiba Sashimi Knives -
Usuba Knives -
Sakimaru Takobiki Knives -
Kiritsuke Yanagiba Knives -
Wa-Santoku Knives -
Kiritsuke Knives -
Mioroshi Knives -
Aideba Knives -
Funayuki Knives -
Fugubiki Knives -
Takobiki Sashimi Knives -
Aji-Kiri Knives -
Baran-Kiri Knives -
Hamo Honekiri Knives -
Fugu Deba Knives -
Unagi Saki Knives -
Mukimono Knives -
Kenmuki Knives -
Sobakiri Knives
-
- Western Knives
- Damascus Knives
- Home Kitchen Knives
- Accessories
- Gifts
- All Products
JO Series
"Jo" comes from the kanji 穣, and once meant good fertility around harvesting produce. This series combines a Blue Steel #2 blade with a rustic, kurouchi finish. The Jo Series has a sharp and tough cutting edge, complimented by unpolished "black rust".
Black rust—the original steel's color, helps stop damaging red rust from forming on the knife.
This Ajikiri is double-edged and works in either hand.
| Product number | Actual Blade Length (mm) | Full Length (mm) | Total Weight (g) |
|---|---|---|---|
| 1hbja | 145 | 270 | 80 |
| Blade | Material Name | Handle |
|---|---|---|
Double Edged |
Blue Steel #2 | Walnut wood with buffalo horn bolster |
Ajikiri
This is a knife for grating small fish such as horse mackerel. Ajikiri blades are thin and small, allowing for nimble work.
Blue Steel #2
Adding tungsten, chromium, and alloy carbides to White Steel makes for a tough, chip-resistant blade.
Carbon Steel
Blue Steel #2 is made by adding trace amounts of tungsten and alloy carbides (both for hardness), and chromium (for toughness and rust resistance) to White Steel, creating an alloy steel that is very tightly bonded. This also leads to better edge retention compared to White Steel #2, so you can cut better for longer. Professional chefs looking to enter the next level of quality will often choose a Blue Steel #2 knife, but beginners can use this also.
*NOTE: Carbon Steel is susceptible to rust if it is not properly cared for. Please clean and dry the blade regularly during use and after use.
Forge Welded
Forging Process
A forge welded blade is essentially a blade made of more than one billet of steel. There are many variations of technique and steel combinations. At its most simple, a forge welded blade is two billets of steel heated and hammer together to form one unified piece. The steel will then be shaped by hammer into the desired blade shape. Hardened and tempered, then ground, sharpened and polished. A forge welded blade has higher strength and edge retention than a stamped blade.
Optional Engraving
Optional Engraving Service
Sakai Ichimonji provides complimentary engraving using either Japanese Kanji or English Alphabet. Please specify your preference. For details, please visit here
A knife store that has supported the history of knives and food culture in Japan.
It has been 600 years since the birth of swordmaking in the Sakai region of Japan. Sakai Ichimonji Mitsuhide's and it's craftsmen continue to build on that legacy by producing the finest blades in Japan.
This is where the culture of completing a dish of sashimi by "just cutting" and the culture of expressing sharpness as "taste" was born.
For 70 years, we have been connecting the spirit of Sakai's craftsmen with the passion of chefs in Osaka's kitchen equipment shopping district, known as the kitchen of Japan.
We are very happy that our knives can be used by people all over the world.
Precautions
After use, wash off any dirt and wipe thoroughly with a dry cloth to remove any moisture. This product is not for use with frozen foods.This product is handmade, so each piece will be different. Please use the weight and length listed as a guide. Each material is natural and may vary in color. It is not the same as the picture.We take great care with our inventory, but in the unlikely event that we are out of stock, we will contact you by email to let you know.
